- ページ 13

ネットワーク・ハードウェア Cisco 3110のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Cisco 3110 42 ページ。
Cisco 3110 にも：はじめに (42 ページ)

ページを印刷する

Overview

Rear Panel

The following figure shows the rear panel of the Secure Firewall 3100.

SSD 1 Status

• Off—The SSD is not present.

• Green—The SSD is present; no activity.

• Green, flashing—The SSD is active.

• Amber—The SSD has a problem or failure.

SSD 2 Status

• Off—The SSD is not present.

• Green—The SSD is present; no activity.

• Green, flashing—The SSD is active.

• Amber—The SSD has a problem or failure.

Activity Status (Role of a high-availability pair)

• Off—The unit is not configured or enabled

in a high-availability pair.

• Green—The unit is in active mode.

• Amber—The unit is in standby mode.

System Status

• Off—System has not booted up yet.

• Green, flashing quickly—System is booting

up.

• Green—Normal system function.

• Amber—System boot up has failed.

• Amber, flashing—Alarm condition, system

needs service or attention and may not boot

properly.

Power Status

• Off—Input power is not detected. If the AC

power cord is plugged in, and the LED on

the power supply is blinking green, standby

power is still on.

• Green, flashing—The system has detected

a power switch toggle event, and initiated

the shutdown sequence. If the power switch

is in the OFF position, the system powers

off after shutdown is completed. Do not

remove the AC or DC power source while

this LED is blinking so that the system has

time to perform a graceful shutdown.

• Amber—The system is powering up (before

the BIOS boots). This takes one to five

seconds at most.

• Green—The system is fully powered up.

—

Rear Panel

Overview