- ページ 16

ネットワーク・ハードウェア Cisco Aironet 1250 SeriesのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Cisco Aironet 1250 Series 37 ページ。 Aironet 1250 series
Cisco Aironet 1250 Series にも：設定マニュアル (40 ページ), データシート (14 ページ), ハードウェア・インストール・マニュアル (10 ページ)

ページを印刷する

1. Configuring the Access Point

Note

The 1250 series power injector, 1250 series DC power module, and

antennas are not tested to UL 2043 and should not be placed in a

building's environmental air space.

Connecting Power

The access point can be powered locally by the 1250 DC power module or an

IEEE 802.3af compliant Power-over-Ethernet (PoE) power source. However,

if the access point is powered by an 802.3af source, only one radio is

supported because the two radio operation requires 18.5 watts. Two radio

operation is supported only by the 1250 series power injector and an 802.at

compliant PoE switch.

IEC60950 and IEEE 802.3af devices include:

•

A 1250 DC power module connected to the access point's power

connector

– The 1250 DC power module should be plugged into a 100-240 VAC

source

•

The following devices provide PoE:

– An IEEE 802.af compliant power source

78-17831-01