Cisco Aironet 1250 Series 매뉴얼 - 페이지 16

{카테고리_이름} Cisco Aironet 1250 Series에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Aironet 1250 Series 37 페이지. Aironet 1250 series
Cisco Aironet 1250 Series에 대해서도 마찬가지입니다: 구성 매뉴얼 (40 페이지), 데이터시트 (14 페이지), 하드웨어 설치 매뉴얼 (10 페이지)

페이지 인쇄

1. Configuring the Access Point

Note

The 1250 series power injector, 1250 series DC power module, and

antennas are not tested to UL 2043 and should not be placed in a

building's environmental air space.

Connecting Power

The access point can be powered locally by the 1250 DC power module or an

IEEE 802.3af compliant Power-over-Ethernet (PoE) power source. However,

if the access point is powered by an 802.3af source, only one radio is

supported because the two radio operation requires 18.5 watts. Two radio

operation is supported only by the 1250 series power injector and an 802.at

compliant PoE switch.

IEC60950 and IEEE 802.3af devices include:

•

A 1250 DC power module connected to the access point's power

connector

– The 1250 DC power module should be plugged into a 100-240 VAC

source

•

The following devices provide PoE:

– An IEEE 802.af compliant power source

78-17831-01