Cisco Aironet 1250 Series 매뉴얼 - 페이지 18

{카테고리_이름} Cisco Aironet 1250 Series에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Aironet 1250 Series 37 페이지. Aironet 1250 series
Cisco Aironet 1250 Series에 대해서도 마찬가지입니다: 구성 매뉴얼 (40 페이지), 데이터시트 (14 페이지), 하드웨어 설치 매뉴얼 (10 페이지)

페이지 인쇄

1. Configuring the Access Point

Note

If your access point is connected to in-line power, do not connect the

power module to the access point. Using two power sources on the

access point might cause the access point to shut down to protect

internal components and might cause the switch to shut down the

port to which the access point is connected. If your access point

shuts down, you must remove all power and reconnect only a single

power source.

Obtaining and Assigning an IP Address

To browse to the access point Express Setup page, you must either obtain or

assign the access point IP address using these methods:

•

Assign a static IP address by connecting to its console port and opening

the access point CLI.

•

Use a DHCP server (if available) to automatically assign an IP address.

You can find out the DHCP-assigned IP address by using one of the

following methods:

– Connect to the access point console port and use a Cisco IOS

command such as show interface bvi1 to display the IP address.

78-17831-01