Cisco Aironet 1250 Series Посібник - Сторінка 18

Переглянути онлайн або завантажити pdf Посібник для Мережеве обладнання Cisco Aironet 1250 Series. Cisco Aironet 1250 Series 37 сторінок. Aironet 1250 series
Також для Cisco Aironet 1250 Series: Посібник з конфігурації (40 сторінок), Технічний паспорт (14 сторінок), Посібник з встановлення обладнання (10 сторінок)

Note

If your access point is connected to in-line power, do not connect the

power module to the access point. Using two power sources on the

access point might cause the access point to shut down to protect

internal components and might cause the switch to shut down the

port to which the access point is connected. If your access point

shuts down, you must remove all power and reconnect only a single

power source.

Obtaining and Assigning an IP Address

To browse to the access point Express Setup page, you must either obtain or

assign the access point IP address using these methods:

•

Assign a static IP address by connecting to its console port and opening

the access point CLI.

•

Use a DHCP server (if available) to automatically assign an IP address.

You can find out the DHCP-assigned IP address by using one of the

following methods:

– Connect to the access point console port and use a Cisco IOS

command such as show interface bvi1 to display the IP address.

78-17831-01