- ページ 35

ネットワーク・ハードウェア Cisco UCS X10cのPDF インストレーション＆サービスマニュアルをオンラインで閲覧またはダウンロードできます。Cisco UCS X10c 38 ページ。 Front mezzanine gpu module

Servicing the GPU Module

Gather the following tools before you start this procedure:

• #2 Phillips screwdriver

• T10 Torx screwdriver

Step 1

Remove the SSD drives.

See

Removing a Drive, on page

Step 2

Remove the GPU module.

a) Using a #2 Phillips screwdriver, remove the M3 screws.

b) Grasp the GPU module and remove it.

c) Grasp each of the two cable connectors and disconnect the cables from the module.

Step 3

(Optional) Remove the GPU card(s) from the GPU module.

a) Using a #2 Phillips screwdriver, remove the M3 screws.

b) Grasp each GPU at both ends and slide it out of the GPU module.

22.

Cisco UCS X10c Front Mezzanine GPU Module Installation and Service Guide

Recycling the PCB Assembly (PCBA)