Cisco UCS X10c 설치 및 서비스 매뉴얼 - 페이지 35

{카테고리_이름} Cisco UCS X10c에 대한 설치 및 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco UCS X10c 38 페이지. Front mezzanine gpu module

Servicing the GPU Module

Gather the following tools before you start this procedure:

• #2 Phillips screwdriver

• T10 Torx screwdriver

Step 1

Remove the SSD drives.

See

Removing a Drive, on page

Step 2

Remove the GPU module.

a) Using a #2 Phillips screwdriver, remove the M3 screws.

b) Grasp the GPU module and remove it.

c) Grasp each of the two cable connectors and disconnect the cables from the module.

Step 3

(Optional) Remove the GPU card(s) from the GPU module.

a) Using a #2 Phillips screwdriver, remove the M3 screws.

b) Grasp each GPU at both ends and slide it out of the GPU module.

22.

Cisco UCS X10c Front Mezzanine GPU Module Installation and Service Guide

Recycling the PCB Assembly (PCBA)