- ページ 18

サーバー Cisco UCS B200 M4のPDF インストールとサービスノートをオンラインで閲覧またはダウンロードできます。Cisco UCS B200 M4 46 ページ。 For e5-2600 v4 series cpus
Cisco UCS B200 M4 にも：インストールとサービスノート (30 ページ), アップグレードマニュアル (9 ページ), 整備マニュアル (24 ページ)

Server Troubleshooting

Procedure

Step 1

Loosen the captive screw on the front of the blade.

Step 2

Remove the blade from the chassis by pulling the ejector lever on the blade until it unseats the blade server.

Step 3

Slide the blade part of the way out of the chassis, and place your other hand under the blade to support its

weight.

Step 4

Once removed, place the blade on an antistatic mat or antistatic foam if you are not immediately reinstalling

it into another slot.

Step 5

If the slot is to remain empty, install a blank faceplate (N20-CBLKB1) to keep dust out of the chassis.

Server Troubleshooting

For general troubleshooting information, see the see the

Cisco UCS B200 M4 Blade Server Installation and Service Note

Cisco UCS Manager B-Series Troubleshooting

Installing a Blade Server

Guide.