- ページ 28

サーバー Cisco UCS B200 M4のPDF インストールとサービスノートをオンラインで閲覧またはダウンロードできます。Cisco UCS B200 M4 46 ページ。 For e5-2600 v4 series cpus
Cisco UCS B200 M4 にも：インストールとサービスノート (30 ページ), アップグレードマニュアル (9 ページ), 整備マニュアル (24 ページ)

Installing a New CPU and Heat Sink

Step 3

Unhook the self-loading socket (SLS) lever

Step 4

Unhook the SLS lever .

Step 5

Grasp the sides of the CPU carrier (indicated by the arrows in the illustration) and swing it into a standing

position in the SLS plug seat.

Figure 12: CPU Carrier and SLS Plug Seat

Step 6

Pull the CPU carrier up and out of the SLS plug seat.

Before installing a new CPU in a server, verify the following:

• The CPU is supported for that given server model. This may be verified through the server Technical

• A BIOS update is available and installed that supports the CPU and the given server configuration.

• If the server will be managed by Cisco UCS Manager, the service profile for this server in Cisco UCS

• The CPUs and heat sinks are different and must be installed in the correct location. The front heat sink

Cisco UCS B200 M4 Blade Server Installation and Service Note

Specifications ordering guides or by the relevant release of the Cisco UCS Capability Catalog.

Manager will recognize and allow the new CPU.

and CPU 1 can only be installed in the front of the blade server and the rear heat sink and CPU 2 can

only be installed in the rear of the blade server.

Servicing a Blade Server