- ページ 19

サーバー Cisco UCS B250 M1のPDF インストールとサービスノートをオンラインで閲覧またはダウンロードできます。Cisco UCS B250 M1 34 ページ。 Extended memory blade server

S e n d d o c u m e n t c o m m e n t s t o u c s - d o c f e e d b a c k @ c i s c o . c o m

Install a motherboard CMOS battery:

Step 2

Figure 9

CMOS battery replacement will not have any impact on UCS Manager.

Removing a CPU or Heat Sink

You can order your blade server with two CPUs, or upgrade later to a second CPU. Both CPUs must be

of the same type, and memory in slots intended for the second CPU will not be recognized if the second

CPU is not present (see

a CPU from one server to another, or to replace a faulty CPU.

Table 3

Product ID

N20-X00001 / Xeon X5570

N20-X00002 / Xeon E5540

OL-22474-03

Press the battery socket retaining clip toward the chassis wall.

Insert the new battery into the socket with the battery's positive (+) marking toward the chassis wall.

Ensure that the retaining clip clicks over the top of the battery.

Replace the top cover.

Replace the server in the chassis, and then power on the server by pressing the Power button.

Removing and Replacing a Motherboard CMOS Battery

Memory Arrangement, page

and

Table 4

show the available CPU options:

CPU Options, M1 Models

Cisco UCS B250 Extended Memory Blade Server Installation and Service Note

26). You may need to use these procedures to move

Power Draw (W) Clock Speed

95 W

2.93 GHz

80 W

2.53 GHz

Working Inside the Extended Memory Blade Server

DDR3

Cache

1333

8 MB

1066

8 MB

Low

Voltage