- ページ 15

ゲートウェイ Cisco ASR 5000のPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Cisco ASR 5000 18 ページ。 Applying power and verifying the installation
Cisco ASR 5000 にも：インストレーション・マニュアル (33 ページ), インストール手順 (8 ページ), インストレーション・マニュアル (37 ページ)

Chassis Installation

During installation, maintenance, and/or removal, wear grounding wrist straps to avoid ESD damage to

Caution

the components. Failure to do so could result in damage to sensitive electronic components and potentially

void your warranty.

Step 1

Re-install the PFUs into the chassis.

a) Locate the PFU bays at the lower-rear of the chassis. The bays are labeled from left to right Power Filter Unit 1 and

Power Filter Unit 2.

b) Slide the PFU assembly into the PFU bay labeled Power Filter Unit 1 until it is flush against the chassis.

c) Use a Phillips #2 screwdriver to tighten each of the four screws on the PFU to secure it to the chassis.

d) Re-install the second PFU in the PFU bay labeled Power Filter Unit 2 by repeating step b and step c.

Step 2

Re-install the lower fan tray assembly into the chassis.

Re-Installing Chassis Sub-components

ASR 5000 Installation Guide