Cisco ASR 5000 설치 매뉴얼 - 페이지 15

{카테고리_이름} Cisco ASR 5000에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco ASR 5000 18 페이지. Applying power and verifying the installation
Cisco ASR 5000에 대해서도 마찬가지입니다: 설치 매뉴얼 (33 페이지), 설치 절차 (8 페이지), 설치 매뉴얼 (37 페이지)

페이지 인쇄

Chassis Installation

During installation, maintenance, and/or removal, wear grounding wrist straps to avoid ESD damage to

Caution

the components. Failure to do so could result in damage to sensitive electronic components and potentially

void your warranty.

Step 1

Re-install the PFUs into the chassis.

a) Locate the PFU bays at the lower-rear of the chassis. The bays are labeled from left to right Power Filter Unit 1 and

Power Filter Unit 2.

b) Slide the PFU assembly into the PFU bay labeled Power Filter Unit 1 until it is flush against the chassis.

c) Use a Phillips #2 screwdriver to tighten each of the four screws on the PFU to secure it to the chassis.

d) Re-install the second PFU in the PFU bay labeled Power Filter Unit 2 by repeating step b and step c.

Step 2

Re-install the lower fan tray assembly into the chassis.

Re-Installing Chassis Sub-components

ASR 5000 Installation Guide