Cisco ASR 5000 Installatiehandleiding - Pagina 15

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Cisco ASR 5000. Cisco ASR 5000 18 pagina's. Applying power and verifying the installation
Ook voor Cisco ASR 5000: Installatiehandleiding (33 pagina's), Installatieprocedure (8 pagina's), Installatiehandleiding (37 pagina's)

Pagina afdrukken

Chassis Installation

During installation, maintenance, and/or removal, wear grounding wrist straps to avoid ESD damage to

Caution

the components. Failure to do so could result in damage to sensitive electronic components and potentially

void your warranty.

Step 1

Re-install the PFUs into the chassis.

a) Locate the PFU bays at the lower-rear of the chassis. The bays are labeled from left to right Power Filter Unit 1 and

Power Filter Unit 2.

b) Slide the PFU assembly into the PFU bay labeled Power Filter Unit 1 until it is flush against the chassis.

c) Use a Phillips #2 screwdriver to tighten each of the four screws on the PFU to secure it to the chassis.

d) Re-install the second PFU in the PFU bay labeled Power Filter Unit 2 by repeating step b and step c.

Step 2

Re-install the lower fan tray assembly into the chassis.

Re-Installing Chassis Sub-components

ASR 5000 Installation Guide