- ページ 14

ドライヤー Ariston ASL 75 CXS NAのPDF 修理マニュアルをオンラインで閲覧またはダウンロードできます。Ariston ASL 75 CXS NA 18 ページ。 Condensation dryer
Ariston ASL 75 CXS NA にも：データシート (1 ページ), パンフレット＆スペック (8 ページ), 使用および設置マニュアル (40 ページ), お手入れ、使用および設置に関する小冊子 (40 ページ)

12. MOTOR REPLACEMENT Cont.

• Next remove the rear Fan Blade by first removing the nine Phillips screws attaching the Heater Housing to the Rear Panel

(Fig. 12-6). Then remove the Fan Blade Clamp and slide the Rear Fan Blade from the Motor Shaft (Fig.12-7). Now remove the

four 8mm Motor Mounting Bolts and the Motor can be removed and replaced.

12. MOTOR INSTALLATION

TECH NOTE: With the Drum Belt loose, dry fit the new Motor and align the four Motor Mounting Bolt Screw Holes of the Motor with

the four rear bolt hole openings on the Base. Then mark both the Motor and the Motor Base with a reference line (Fig. 12-9). This will

make it easier to install the Motor and align the bolt holes and threads as you hold tension on the belt while inserting the four bolts.

• With your reference line in place, install the Belt around the Motor Shaft and Pulley. Now using a screwdriver tension the belt.

When your two reference lines are aligned insert one of the 8mm Motor Mounting Bolts and secure (Fig.12-10). Then install the

other three Mounting Bolts and reinstall all Motor Components and test.

REPAIR MANUAL

Fig. 12-6

TECH NOTE

Fig. 12-9

Fig. 12-7

ASL75CXS NA

Fig. 12-8

Fig. 12-10

Page: 11