Ariston ASL 75 CXS NA 수리 매뉴얼 - 페이지 14

{카테고리_이름} Ariston ASL 75 CXS NA에 대한 수리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ariston ASL 75 CXS NA 18 페이지. Condensation dryer
Ariston ASL 75 CXS NA에 대해서도 마찬가지입니다: 데이터시트 (1 페이지), 브로셔 및 사양 (8 페이지), 사용 및 설치 매뉴얼 (40 페이지), 관리, 사용 및 설치 책자 (40 페이지)

페이지 인쇄
Ariston ASL 75 CXS NA 수리 매뉴얼
12. MOTOR REPLACEMENT Cont.
• Next remove the rear Fan Blade by first removing the nine Phillips screws attaching the Heater Housing to the Rear Panel
(Fig. 12-6). Then remove the Fan Blade Clamp and slide the Rear Fan Blade from the Motor Shaft (Fig.12-7). Now remove the
four 8mm Motor Mounting Bolts and the Motor can be removed and replaced.
12. MOTOR INSTALLATION
TECH NOTE: With the Drum Belt loose, dry fit the new Motor and align the four Motor Mounting Bolt Screw Holes of the Motor with
the four rear bolt hole openings on the Base. Then mark both the Motor and the Motor Base with a reference line (Fig. 12-9). This will
make it easier to install the Motor and align the bolt holes and threads as you hold tension on the belt while inserting the four bolts.
• With your reference line in place, install the Belt around the Motor Shaft and Pulley. Now using a screwdriver tension the belt.
When your two reference lines are aligned insert one of the 8mm Motor Mounting Bolts and secure (Fig.12-10). Then install the
other three Mounting Bolts and reinstall all Motor Components and test.
REPAIR MANUAL
Fig. 12-6
TECH NOTE
Fig. 12-9
Fig. 12-7
ASL75CXS NA
Fig. 12-8
Fig. 12-10
Page: 11