- ページ 17

オール・イン・ワン・プリンター Xerox WorkCentre Pro 65のPDF システム管理マニュアルをオンラインで閲覧またはダウンロードできます。Xerox WorkCentre Pro 65 30 ページ。 Pdl reference guide
Xerox WorkCentre Pro 65 にも：クイック・スタート・マニュアル (16 ページ), ユーザーマニュアル (24 ページ), ネットワーク・インストレーション・マニュアル (42 ページ), リファレンス・マニュアル (22 ページ)

Universal Serial Bus Printing

Xerox WorkCentre Pro System Administration Guide Supplement

The USB Printer Port can be used for printing directly from a

PC connected via a USB cable. USB printing from Windows

98/Me/XP and 2000 is supported. The USB port for printing is

located on the network controller at the back of the machine

on the bottom left hand side, next to the Ethernet port.

Go to the WorkCentre Pro and...

1. Enter the Tools pathway.

a) Press the Access (

b) On the keypad enter 1111 or the current password.

Press Enter. The Touch Screen will be used for the

remainder of the data entry, unless instructed

otherwise.

2. Press More.

3. Press Connectivity and Network Setup.

4. Press Physical Media.

5. Press USB Printer Port.

6. Press Enable.

7. Use the up and down scroll arrows to select the setting

required for the Printer Port Timeout.

NOTE: The default Timeout value is 5 seconds. If you are

using an older PC and experience any print problems, you

may need to increase this value.

8. Press Save.

9. Press Exit Tools.

10. Verify the USB Print Kit has been installed and the USB

Printer Port has been enabled by printing a Configuration

Report. (For instructions click the Network Connectivity

tab and select Configuration Report from the menu list.)

On the Configuration Report, under Device Profile, USB

Printer Port should read Installed and the USB Printer

Port Settings: USB Port Enabled should read Enabled.

) button.

Page 1 - 5