- ページ 6
電動工具 Clarke ZX-R Pro SeriesのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Clarke ZX-R Pro Series 9 ページ。 20v cordless multi function tool
Clarke ZX-R Pro Series にも： 取扱説明書 (8 ページ), 取扱説明書 (17 ページ), 取扱説明書 (13 ページ), 取扱説明書 (17 ページ), 取扱説明書 (17 ページ)
ページを印刷する
HOW TO CHARGE A BATTERY
WARNING: THE BATTERY CAN BE HOT TO THE TOUCH WHEN REMOVED
FROM THE TOOL. ALWAYS LET THE BATTERY COOL DOWN BEFORE
RECHARGING. DO NOT RECHARGE A HOT BATTERY.
NOTE: New batteries must be charged before use.
1. Connect the battery charger to the power supply.
2. Slide the battery on to the battery
charger until the battery clicks
into position.
3. To remove the battery, push the
latches on each side of the
battery and slide it from the
battery charger.
4. After charging, disconnect the
charger from the power supply.
INDICATOR LIGHTS
When the battery pack is secured in the battery charger, the indicator lights
on the battery charger will show the charging status:
Steady
GREEN
Flashing
GREEN
Steady RED
RED and
GREEN lights
both
flashing the
same time
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
Battery is fully charged or no battery is fitted.
Charging and the battery is more than 90% full.
Charging
The battery pack is too hot or too cold for charging (below
0°C/32°F or above 45°C/113°). You should let the battery
pack cool down for approximately 30 minutes before
attempting to recharge.
6