- ページ 13

換気フード Zanussi ZHC 913のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Zanussi ZHC 913 21 ページ。 Cooker hood
Zanussi ZHC 913 にも：取扱説明書 (20 ページ)

Draw a horizontal line through the vertical line

at X. X is a distance between the centre of the

top and bottom fixing holes on the upper

chimney stack. Mark the centre positions for

the middle bracket fixing screws (3) at 95mm

either of the vertical line (screws not supplied).

Drill the holes for the fixing screws using an

8mm masonary drill and fix the wall brackets

using the plastic rawl plugs and 44mm screws

(not supplied). Ensure the lower bracket (1)

is fitted with the lugs at the bottom.

Note: If the hood is to be installed onto a hollow

construction or plaster or partition board

wall then special fixing screws will be

required (not supplied).

Fitting the Canopy Hood

Hook the canopy (C), onto the wall fixing

brackets (4)ensuring the security fixing screws

align with the holes in the centre of the back

panel of the cooker hood as illustrated.

Fit the two regulation screws of 4M x 25

(supplied) into the keyholes of the wall

brackets.

the canopy can be aligned or adjusted in

height by using the two adjustement screws.