Zanussi ZHC 913 Folheto de instruções - Página 13
Procurar online ou descarregar pdf Folheto de instruções para Campânula de ventilação Zanussi ZHC 913. Zanussi ZHC 913 21 páginas. Cooker hood
Também para Zanussi ZHC 913: Folheto de instruções (20 páginas)
Imprimir página
4.
Draw a horizontal line through the vertical line
at X. X is a distance between the centre of the
top and bottom fixing holes on the upper
chimney stack. Mark the centre positions for
the middle bracket fixing screws (3) at 95mm
either of the vertical line (screws not supplied).
5.
Drill the holes for the fixing screws using an
8mm masonary drill and fix the wall brackets
using the plastic rawl plugs and 44mm screws
(not supplied). Ensure the lower bracket (1)
is fitted with the lugs at the bottom.
Note: If the hood is to be installed onto a hollow
construction or plaster or partition board
wall then special fixing screws will be
required (not supplied).
Fitting the Canopy Hood
1.
Hook the canopy (C), onto the wall fixing
brackets (4)ensuring the security fixing screws
align with the holes in the centre of the back
panel of the cooker hood as illustrated.
2.
Fit the two regulation screws of 4M x 25
(supplied) into the keyholes of the wall
brackets.
3.
the canopy can be aligned or adjusted in
height by using the two adjustement screws.
13
4