Zanussi ZHC 913 지침 책자 - 페이지 13

{카테고리_이름} Zanussi ZHC 913에 대한 지침 책자을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZHC 913 21 페이지. Cooker hood
Zanussi ZHC 913에 대해서도 마찬가지입니다: 지침 책자 (20 페이지)

Draw a horizontal line through the vertical line

at X. X is a distance between the centre of the

top and bottom fixing holes on the upper

chimney stack. Mark the centre positions for

the middle bracket fixing screws (3) at 95mm

either of the vertical line (screws not supplied).

Drill the holes for the fixing screws using an

8mm masonary drill and fix the wall brackets

using the plastic rawl plugs and 44mm screws

(not supplied). Ensure the lower bracket (1)

is fitted with the lugs at the bottom.

Note: If the hood is to be installed onto a hollow

construction or plaster or partition board

wall then special fixing screws will be

required (not supplied).

Fitting the Canopy Hood

Hook the canopy (C), onto the wall fixing

brackets (4)ensuring the security fixing screws

align with the holes in the centre of the back

panel of the cooker hood as illustrated.

Fit the two regulation screws of 4M x 25

(supplied) into the keyholes of the wall

brackets.

the canopy can be aligned or adjusted in

height by using the two adjustement screws.