- ページ 6

カメラレンズ Nikon D5000のPDF 修理マニュアルをオンラインで閲覧またはダウンロードできます。Nikon D5000 20 ページ。 Nikon digital slr camera product brochure
Nikon D5000 にも：パンフレット (9 ページ), カンニングペーパー (2 ページ), マニュアル (32 ページ)

ページを印刷する

Points to notice for Disassembly and Assembly

Caution:

①　In disassembly/(re)assembly, be sure to use conductive mat (J5033) and wrist strap (J5033-5), in

order to protect electric parts from static electricity.

　　　②　Before disassembling, be sure to remove batteries or AC power cord.

　　　③　In disassembling, be sure to memorize the processing state of wires and FPC, screws to be fixed and

their types, etc.

　　　④　The low-pass filter of the image PCB/base plate is easily damaged. Handle it very carefully.

　 Points to notice for Lead-free solder products

　・ Lead-free solder is used for this product.

　・ For soldering work, the special solder and soldering iron are required.

　・ Do NOT mix up lead-free solder with traditional solder.

Caution:

When "Separation of Front body from Rear body", "Disassembly of Image sensor unit"

and "Disassembly of Bayonet" are performed, be sure to carry out "RESET AF-DEFOCUS

COMPENSATION" of the D5000 adjustment software after assembly.

WARNING

There are high voltege parts inside. Be careful of this electric shock,

when you remove the cover.

You must discharge the main condenser according to the instruction

of this repair manual after you remove the cover.

- D1 ･ D5000 -

INC

VBA24001-R.3783.A