Nikon D5000 Reparatiehandleiding - Pagina 6

Blader online of download pdf Reparatiehandleiding voor {categorie_naam} Nikon D5000. Nikon D5000 20 pagina's. Nikon digital slr camera product brochure
Ook voor Nikon D5000: Brochure (9 pagina's), Spiekbriefje (2 pagina's), Handmatig (32 pagina's)

Pagina afdrukken

Points to notice for Disassembly and Assembly

Caution:

①　In disassembly/(re)assembly, be sure to use conductive mat (J5033) and wrist strap (J5033-5), in

order to protect electric parts from static electricity.

　　　②　Before disassembling, be sure to remove batteries or AC power cord.

　　　③　In disassembling, be sure to memorize the processing state of wires and FPC, screws to be fixed and

their types, etc.

　　　④　The low-pass filter of the image PCB/base plate is easily damaged. Handle it very carefully.

　 Points to notice for Lead-free solder products

　・ Lead-free solder is used for this product.

　・ For soldering work, the special solder and soldering iron are required.

　・ Do NOT mix up lead-free solder with traditional solder.

Caution:

When "Separation of Front body from Rear body", "Disassembly of Image sensor unit"

and "Disassembly of Bayonet" are performed, be sure to carry out "RESET AF-DEFOCUS

COMPENSATION" of the D5000 adjustment software after assembly.

WARNING

There are high voltege parts inside. Be careful of this electric shock,

when you remove the cover.

You must discharge the main condenser according to the instruction

of this repair manual after you remove the cover.

- D1 ･ D5000 -

INC

VBA24001-R.3783.A