Nikon D5000 수리 매뉴얼 - 페이지 6

{카테고리_이름} Nikon D5000에 대한 수리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Nikon D5000 20 페이지. Nikon digital slr camera product brochure
Nikon D5000에 대해서도 마찬가지입니다: 브로셔 (9 페이지), 치트 시트 (2 페이지), 매뉴얼 (32 페이지)

페이지 인쇄

Points to notice for Disassembly and Assembly

Caution:

①　In disassembly/(re)assembly, be sure to use conductive mat (J5033) and wrist strap (J5033-5), in

order to protect electric parts from static electricity.

　　　②　Before disassembling, be sure to remove batteries or AC power cord.

　　　③　In disassembling, be sure to memorize the processing state of wires and FPC, screws to be fixed and

their types, etc.

　　　④　The low-pass filter of the image PCB/base plate is easily damaged. Handle it very carefully.

　 Points to notice for Lead-free solder products

　・ Lead-free solder is used for this product.

　・ For soldering work, the special solder and soldering iron are required.

　・ Do NOT mix up lead-free solder with traditional solder.

Caution:

When "Separation of Front body from Rear body", "Disassembly of Image sensor unit"

and "Disassembly of Bayonet" are performed, be sure to carry out "RESET AF-DEFOCUS

COMPENSATION" of the D5000 adjustment software after assembly.

WARNING

There are high voltege parts inside. Be careful of this electric shock,

when you remove the cover.

You must discharge the main condenser according to the instruction

of this repair manual after you remove the cover.

- D1 ･ D5000 -

INC

VBA24001-R.3783.A