- ページ 2

インバーター AIMS PWRINV800WのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。AIMS PWRINV800W 6 ページ。 800 watt power inverter

ページを印刷する

Welcome

This product has been carefully engineered and manufactured to

give you dependable operation. Please read this manual thoroghly before

operating your new product, as it contains information, you need to become

familiar with. The manual details the inverter's features and allows you to

obain the performance that will bring you continued enjoyment for many years.

Please keep this manual on file for future reference.

How Power Inverters Work

Power inverters convert low voltage DC (direct current) power to 110/120-volt

AC (alternating current) household power. This conversion process thereby

allows you to use household products, power tools, and other electronic

products away from normal AC power sources (standard 110/120V wall outlets).

Depending on the model and its rated capacity, inverters can draw power either

from standard 12-volt automobile and marine batteries or from portable high

power 12-volt power sources.

The waveform that is generated by this conversion is a "modified sine wave" .

The modified sine wave produced by our inverters has a root square mean

(RMS) voltage of 110/120 volts, which is the same as standard household power.

The majority of AC voltmeters are calibrated for RMS voltage under the

assumption that the measured waveform will be a pure sine wave. Therefore,

these meters will not read the RMS modified sine wave voltage correctly.

They will read about 20 to 30 volts too low. To accurately measure the output

voltage of the inverter, use a true RMS reading voltmeter such as a Fluke 87,

Fluke 8060A, Beckman 4410, Triplett 4200 or any voltmeter identified as a "true

RMS" .

Controls and Components

Front Panel

1. ON/OFF Power Switch

2. Green LED Indicator Light

3. Red LED Indicator Light

4. 110/120 Volt AC Outlets

5. Protective Outlet Covers

Power Inverter 800W

Rear Panel

6. Power Input Terminal

Black = Negative

7. Cooling Fan

8. Power Input Terminal

Red = Positive

9. Battery Cables and Clips

Connect these terminals to the color

coded terminals on the back panel

of the inverter

Storage Case (For 800W

Models ONLY)

Owner's Manual

Connect these color coded cable

clamps to your battery terminals

(Red-positive, Black-negative)