- ページ 11
モビリティ・エイド Etac Molift Air SeriesのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Etac Molift Air Series 15 ページ。
ページを印刷する
Charging
Molift Air can be charged in two ways;
Through hand control with a wall mounted battery
charger, or through the rail with In Rail Charging.
Charging through Hand Control
Wall
Mounted
Battery
Charger
Charger
Light
Mains cable
(disconnecting
device)
Battery Charger
The lifter is charged through the Hand control.
The battery charger shall be mounted to a vertical
wall surface close to a power outlet, minimum 120
cm above the floor. The charger has to be used
outside the patient environment. The Charger
must be placed or installed in a way that makes
it easy to disconnect mains cable plug. Take care
not to damage the cable. The charger can be
connected to the power outlet at all times, and
the hand control should be placed in the charger
console when the lifter is not in use.
Charger for handcontrol Nomad/AIR.
Art. no.: 1240100
Charger Light
Description of charger light:
Charger light
Yellow
Yellow
Red
Green/Yellow
Green
Red/Green
Battery
indicator
Hand
Control
Mode
Ready for use, no bat-
tery connected
Initialization
Fast Charge
Top-off charge
Trickle charge
Error
IRC - In Rail Charging
The lifter is charged through a built in charger in
lift motor for continuous charging through the
entire rail system length.
Molift Air IRC has a built in charger, connected to
the battery. It must be installed with IRC Trolley in
a rail system with a conductive tape. The IRC trol-
ley is connected to the battery charger inside the
Molift Air IRC. The IRC trolley is always in contact
with the the conductive tape inside the rail. The
IRC power supply is connected to the conductive
tape through IRC connection at the end of the rail,
and supplies power to the battery charger inside
Molift Air IRC.
Trolley
IRC
IRC fits both Single rail and Traverse systems.
Trolley
IRC
IRC connection RH62
connected to IRC power supply
IRC Power Supply
Art. no.: 2510119
Charger 2515 DC/DV (Part of Molift Air IRC)
Art. no.: 2510147
10
Conductive
Tape
IRC connection RH62
connected to IRC power supply
Conductive
Tape
Traverse
trolley IRC
IRC connection RH112
Connected to
traverse trolley
Conductive
Tape