- ページ 2

ラボラトリー機器 AkraLab PLUGGOのPDF 利用者ハンドブックをオンラインで閲覧またはダウンロードできます。AkraLab PLUGGO 15 ページ。 Automated de-capper

1. General Information – Read this first

Type of equipment and intended use:

Pluggo is used for safe removal of original caps from vacuum collection tubes. It is

intended for use in laboratory environment under normal in-house conditions.

Clinicon AB cannot accept any responsibility for any loss or damage, however caused,

arising from a faulty or incorrect use of the instrument.

Tube Handling

Pluggo is capable of handling 5ml, 7ml, 7ml long and 10ml Vacuum tubes of the same

brand.

Note: Each tube size has to be loaded in its corresponding carousel size with different

colour marks.

Note: Never load de-capped tubes in carousel. Pluggo will damage tubes without caps!

Note: Never change brand without consulting Pluggo technical support.

Carousels

Different tube sizes are handled by use of different carousels with corresponding colour

marks.

Carousel colour

Blue

Red

Grey

Yellow

Note: All tubes placed in a carousel must be of the same type and size. Otherwise,

damaged tubes may result.

Each carousel is capable of loading up to 24 tubes.

[email protected] · 965 116 521 · 902 222 275 · www.akralab.es

Tube size

13 x 75 mm

13 x 100 mm

16 x 75 mm

16 x 100 mm

Volume

5 ml

7 ml long

7 ml short

10 ml