- ページ 13

バイクアクセサリー Cloos Arc Flash 4 evoのPDF 取扱説明書およびスペアパーツリストをオンラインで閲覧またはダウンロードできます。Cloos Arc Flash 4 evo 20 ページ。 Welding helmet
Cloos Arc Flash 4 evo にも：取扱説明書 (16 ページ)

ページを印刷する

5.3.1 Battery charging

1. Check that the voltage of the electrical power supply is correct.

2. Plug the charger into the socket.

3. Connect the battery to the charger. The socket of the battery is positio-

ned on the back side.

4. The charging state is indicated by a red LED diode light.

5. After charging has been completed, the trickle charging regime is ac-

tivated: -red LED Diode goes out, the green LED diode comes on at the

moment of trickle charging.

5.3.2 Battery changing

Removing the battery:

1. Locate the battery catch.

2. Pull back the battery catch and at the same time the battery can be

removed by lifting upwards.

Fitting the battery:

Make sure the battery is the correct way up and then slide into the blower

until the battery catch engages.

It is essential that the battery catch is fully locked.