Cloos Arc Flash 4 evo Kullanım Talimatları ve Yedek Parça Listesi - Sayfa 13

Motosiklet Aksesuarları Cloos Arc Flash 4 evo için çevrimiçi göz atın veya pdf Kullanım Talimatları ve Yedek Parça Listesi indirin. Cloos Arc Flash 4 evo 20 sayfaları. Welding helmet
Ayrıca Cloos Arc Flash 4 evo için: Kullanım Talimatları Kılavuzu (16 sayfalar)

Cloos Arc Flash 4 evo Kullanım Talimatları ve Yedek Parça Listesi

5.3.1 Battery charging

1. Check that the voltage of the electrical power supply is correct.
2. Plug the charger into the socket.
3. Connect the battery to the charger. The socket of the battery is positio-
ned on the back side.
4. The charging state is indicated by a red LED diode light.
5. After charging has been completed, the trickle charging regime is ac-
tivated: -red LED Diode goes out, the green LED diode comes on at the
moment of trickle charging.

5.3.2 Battery changing

Removing the battery:
1. Locate the battery catch.
2. Pull back the battery catch and at the same time the battery can be
removed by lifting upwards.
Fitting the battery:
Make sure the battery is the correct way up and then slide into the blower
until the battery catch engages.
It is essential that the battery catch is fully locked.
13