Cloos Arc Flash 4 evo Instrukcja obsługi i lista części zamiennych - Strona 13
Przeglądaj online lub pobierz pdf Instrukcja obsługi i lista części zamiennych dla Akcesoria motocyklowe Cloos Arc Flash 4 evo. Cloos Arc Flash 4 evo 20 stron. Welding helmet
Również dla Cloos Arc Flash 4 evo: Instrukcja obsługi (16 strony)
Drukuj stronę
5.3.1 Battery charging
1. Check that the voltage of the electrical power supply is correct.
2. Plug the charger into the socket.
3. Connect the battery to the charger. The socket of the battery is positio-
ned on the back side.
4. The charging state is indicated by a red LED diode light.
5. After charging has been completed, the trickle charging regime is ac-
tivated: -red LED Diode goes out, the green LED diode comes on at the
moment of trickle charging.
5.3.2 Battery changing
Removing the battery:
1. Locate the battery catch.
2. Pull back the battery catch and at the same time the battery can be
removed by lifting upwards.
Fitting the battery:
Make sure the battery is the correct way up and then slide into the blower
until the battery catch engages.
It is essential that the battery catch is fully locked.
13