- ページ 12

おもちゃ EG Aircraft MX2 50CC Giant Scale Aerobatic AircraftのPDF マニュアルをオンラインで閲覧またはダウンロードできます。EG Aircraft MX2 50CC Giant Scale Aerobatic Aircraft 19 ページ。

thread-lock is also highly recommended for the engine bolts. The pictures below show the DA50 engine

installation.

3. Mount the ignition module according to the manufacturer's instructions. The best place to mount it is

on the side or top of the engine box. Secure the pickup lead and ignition wires with zip ties so that they

do not vibrate or touch any hot part of the engine or exhaust. The picture below shows the DA50 engine

installation. The author prefers to protect the ignition wires with cable wrap to prevent wear of the mesh

shielding.

4. Mount your ignition battery securely to the engine box. A typical location is on the side or top of the

engine box. The ignition switch should be mounted to the fuselage side wall just behind the cowling.

Secure all cable connections neatly and firmly.

5. Assemble the throttle servo mount using the supplied laser cut parts. This mount can be used to locate

the servo further back in the fuse to suit your engine or specific installation. The throttle servo can also be

mounted in the supplied cutout on the bottom of the engine box. Make sure you do not have any the

ignition module close to this servo. Mount your throttle servo, complete your linkage setup and check for

proper operation with no binding.