ACR Electronics OLAS CORE 빠른 시작 매뉴얼 - 페이지 6

{카테고리_이름} ACR Electronics OLAS CORE에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ACR Electronics OLAS CORE 12 페이지. Testing the alarm
ACR Electronics OLAS CORE에 대해서도 마찬가지입니다: 정확도 테스트 (2 페이지), 설정 및 범위 테스트 (4 페이지), 문제 해결 (2 페이지), 매뉴얼 (2 페이지), 설정 및 범위 테스트 (4 페이지)

페이지 인쇄

OPERATION MANUAL

Index

1. Start up or returning to the vessel

2. Checking logged OLAS transmitter (without the OLAS mobile application)

3. Checking logged OLAS transmitter (with the OLAS mobile application)

4. OLAS mobile application features

5. Pause Tracking

6. Adding an OLAS transmitter (without the OLAS app)

7. Adding an OLAS transmitter (with the OLAS app)

8. Remove an OLAS transmitter

9. Low battery alert

10. Switching off the Core

11. Recommendations

1. START UP OR RETURNING TO THE VESSEL

• Turn on all the OLAS transmitters and place within 2 meters of the Core

• Either switch on the power to the Core by activating the power supply or press the control switch once

• The control switch LED will illuminate Red with sound indication for 3 seconds

• The Core will scan for 30 seconds while the control switch LED flashes Red

• After 30 seconds, any OLAS transmitters within 2 meters of the Core will be logged

• The number of connected OLAS transmitters is then indicated with a sound signal and Red flash per

transmitter

• The control switch will illuminate Red to indicate the Core is tracking

2. CHECKING LOGGED OLAS TRANSMITTERS (WITHOUT THE OLAS MOBILE APP)

• Press the control switch once

• The number of logged OLAS transmitters is indicated with a sound signal and Red flash per transmitter

3. CHECKING LOGGED OLAS TRANSMITTERS (WITH THE OLAS MOBILE APP)

• Download and open the ACR OLAS application from Google Play or the App store

• Select the Core from the device selection page

• All OLAS transmitters that are being tracked will be indicated on the home page