Coastal MYGIG LOCKPICK PRO 설치 및 작동 지침 매뉴얼 - 페이지 3
{카테고리_이름} Coastal MYGIG LOCKPICK PRO에 대한 설치 및 작동 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Coastal MYGIG LOCKPICK PRO 15 페이지. Adapter for chrysler/dodge/jeep
OK, let's get started. On your MYGIG LOCKPICK PRO ADAPTER control box are switch settings which allow you to program the Lockpick
for your vehicle and the features you would like to enable. The diagrams below are important to enable the PRO module to work with MYGIG radio
systems. More than one switch may be turned on at a time to create the feature list you desire. Improper switch settings will not damage anything
however it could cause your radio to fail to turn on or conflict with existing accessories.
LOCKPICK
PROGRAMMING
**CHECK WITH THE DEALER YOU
PURCHASED THE RADIO FROM, TO
DETERMINE RADIO SPEED
Place switch 2 UP if your new
radio is a LOW SPEED
communication radio.
(This is the standard radio for a Mygig
Adpater upgrade)
Place switch 2 DOWN if your
new radio is a HIGH SPEED
communications radio.
(The Adapter can allow high speed radios to
operate in your low speed vehicle.)
SET VEHICLE
SELECT TO
UP
POSITION
LEAVE ALL COMMUNICATION
"1"
UP
POSITION
SWITCHES IN THE UP / OFF
POSITION
LOCKPICK PRO
Camera Options
Place switch 5 UP for
standard Camera/Aux video
installations.
See standard
installation diagram
Place switch 5 DOWN if
connecting FRONT, REAR,
LEFT, and RIGHT cameras
at the same time.
See last page for
alternate installation diagram