Canon PIXMA MX340 Series 네트워크 설정 문제 해결 - 페이지 9

{카테고리_이름} Canon PIXMA MX340 Series에 대한 네트워크 설정 문제 해결을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon PIXMA MX340 Series 13 페이지. Cartridge reset
Canon PIXMA MX340 Series에 대해서도 마찬가지입니다: 설치 매뉴얼 (17 페이지), 설치 매뉴얼 (11 페이지), 네트워크 설정 매뉴얼 (26 페이지), 브로셔 (2 페이지), 매뉴얼 (8 페이지), 매뉴얼 (10 페이지), 네트워크 설치 매뉴얼 (16 페이지), 연결 매뉴얼 (11 페이지), 간소화된 서비스 매뉴얼 (35 페이지), 매뉴얼 (4 페이지)

페이지 인쇄
Canon PIXMA MX340 Series 네트워크 설정 문제 해결

Reference Information

Configuring the Access Point's Wireless LAN Settings Manually

Action
Enter the access point name/network name (SSID) and security setting (WEP, WPA,
etc.) directly.
Follow the procedure below.
1
Perform
to
in "Install the Software (2)" on page 27 in the printed manual:
Getting Started.
•
If the Detected Access Points List screen is
displayed, go to
.
2
When the Confirm Connection Access
Point screen appears, click No (A).
•
The Detected Access Points List screen is
displayed.
3
Click Manual Setup (B).
•
The Manual Setup screen is displayed.
4
Enter the access point name/network name
(SSID) in SSID (C).
5
Select the security protocol for the access
point in Encryption Method (D), then click
Configuration (E).
•
Go to either of the following steps according
to the selected Encryption Method (security
protocol).
Disable
Go to
WEP
Go to
WPA/WPA2
Go to
A
B
C
D
on page 8.
.
on page 8.
6-A
WEP
1
Enter the network key in WEP Key (F).
•
Enter upper and lower case letters of the alphabet correctly when the network key is
5 or 13 characters. Letters are case sensitive.
Letters are not case sensitive if the network key is 10 or 26 characters (digits).
2
Select Key Length (G).
•
When WEP 40 bit is selected in AirPort Utility (AirPort Admin Utility), select 64 bit.
•
When WEP (Transitional Security Network) is selected in AirPort Utility, select 128
bit.
3
Select Key Format (H).
•
Select Characters when the network key is 5 or 13 characters.
Select Hexadecimal when it is 10 or 26 characters (digits).
4
Select Key ID (I).
•
When using AirPort, select 1 in the screen.
Selecting other key numbers will disable the connection between the machine and
AirPort.
5
Select Authentication (J), then click OK (K).
Go to
E
WPA/WPA2
K
on page 8.
(P.8)
Disable
(P.8)
F
G
H
I
J