Canon PIXMA MX340 Series 네트워크 설정 문제 해결 - 페이지 10

{카테고리_이름} Canon PIXMA MX340 Series에 대한 네트워크 설정 문제 해결을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon PIXMA MX340 Series 13 페이지. Cartridge reset
Canon PIXMA MX340 Series에 대해서도 마찬가지입니다: 설치 매뉴얼 (17 페이지), 설치 매뉴얼 (11 페이지), 네트워크 설정 매뉴얼 (26 페이지), 브로셔 (2 페이지), 매뉴얼 (8 페이지), 매뉴얼 (10 페이지), 네트워크 설치 매뉴얼 (16 페이지), 연결 매뉴얼 (11 페이지), 간소화된 서비스 매뉴얼 (35 페이지), 매뉴얼 (4 페이지)

페이지 인쇄
Canon PIXMA MX340 Series 네트워크 설정 문제 해결
6-B
WPA/WPA2
1
Enter the network key in Passphrase (L).
•
Enter upper and lower case letters of the alphabet correctly when the network key is
between 8 and 63 characters. Letters are case sensitive.
Letters are not case sensitive if the network key is 64 characters.
2
Select Dynamic Encryption Type (M), then click OK (N).
•
When WEP (Transitional Security Network) is selected in AirPort Utility, select
AES(Secure Encryption).
Go to
.
7
The Manual Setup screen returns. Click Connect.
•
After that, follow the on-screen instructions to proceed with settings.
Disable
L
M
N

Restoring the Machine's Default LAN Settings to Perform Setup Again

Action
Follow the procedure below to restore LAN settings of the machine to the default state.
1
Use the Menu button to select Device settings.
2
Use the [ or ] button to select LAN settings, then
press the OK button.
3
Select Reset LAN settings, then press the OK button.
4
Select Yes, then press the OK button.
5
Make sure that the screen shown to the right appears.
•
After a while, the Device settings screen returns. Press the
COPY button.
The LAN setting of the machine is now restored to the default state.
•
Perform setup by following the procedures in "10 Set Up a Wireless Connection" on page 26 and
onward in the printed manual: Getting Started.
<Default State>
Wireless LAN
Inactive
SSID
BJNPSETUP
Data encryption
Inactive
TCP/IP setting
Obtain an IP address automatically