Canon PIXMA MX340 Series Resolução de problemas de configuração de rede - Página 10

Procurar online ou descarregar pdf Resolução de problemas de configuração de rede para Impressora tudo em um Canon PIXMA MX340 Series. Canon PIXMA MX340 Series 13 páginas. Cartridge reset
Também para Canon PIXMA MX340 Series: Manual de instalação (17 páginas), Manual de instalação (11 páginas), Manual de configuração de rede (26 páginas), Brochura (2 páginas), Manual (8 páginas), Manual (10 páginas), Manual de instalação de rede (16 páginas), Manual de ligação (11 páginas), Manual de serviço simplificado (35 páginas), Manual (4 páginas)

Imprimir página
Canon PIXMA MX340 Series Resolução de problemas de configuração de rede
6-B
WPA/WPA2
1
Enter the network key in Passphrase (L).
•
Enter upper and lower case letters of the alphabet correctly when the network key is
between 8 and 63 characters. Letters are case sensitive.
Letters are not case sensitive if the network key is 64 characters.
2
Select Dynamic Encryption Type (M), then click OK (N).
•
When WEP (Transitional Security Network) is selected in AirPort Utility, select
AES(Secure Encryption).
Go to
.
7
The Manual Setup screen returns. Click Connect.
•
After that, follow the on-screen instructions to proceed with settings.
Disable
L
M
N

Restoring the Machine's Default LAN Settings to Perform Setup Again

Action
Follow the procedure below to restore LAN settings of the machine to the default state.
1
Use the Menu button to select Device settings.
2
Use the [ or ] button to select LAN settings, then
press the OK button.
3
Select Reset LAN settings, then press the OK button.
4
Select Yes, then press the OK button.
5
Make sure that the screen shown to the right appears.
•
After a while, the Device settings screen returns. Press the
COPY button.
The LAN setting of the machine is now restored to the default state.
•
Perform setup by following the procedures in "10 Set Up a Wireless Connection" on page 26 and
onward in the printed manual: Getting Started.
<Default State>
Wireless LAN
Inactive
SSID
BJNPSETUP
Data encryption
Inactive
TCP/IP setting
Obtain an IP address automatically