Canon PIXMA MX340 Series Problemen met netwerkinstellingen oplossen - Pagina 10

Blader online of download pdf Problemen met netwerkinstellingen oplossen voor {categorie_naam} Canon PIXMA MX340 Series. Canon PIXMA MX340 Series 13 pagina's. Cartridge reset
Ook voor Canon PIXMA MX340 Series: Installatiehandleiding (17 pagina's), Installatiehandleiding (11 pagina's), Handleiding voor netwerkinstellingen (26 pagina's), Brochure (2 pagina's), Handmatig (8 pagina's), Handmatig (10 pagina's), Handleiding voor netwerkinstallatie (16 pagina's), Aansluithandleiding (11 pagina's), Vereenvoudigde onderhoudshandleiding (35 pagina's), Handmatig (4 pagina's)

Pagina afdrukken
Canon PIXMA MX340 Series Problemen met netwerkinstellingen oplossen
6-B
WPA/WPA2
1
Enter the network key in Passphrase (L).
•
Enter upper and lower case letters of the alphabet correctly when the network key is
between 8 and 63 characters. Letters are case sensitive.
Letters are not case sensitive if the network key is 64 characters.
2
Select Dynamic Encryption Type (M), then click OK (N).
•
When WEP (Transitional Security Network) is selected in AirPort Utility, select
AES(Secure Encryption).
Go to
.
7
The Manual Setup screen returns. Click Connect.
•
After that, follow the on-screen instructions to proceed with settings.
Disable
L
M
N

Restoring the Machine's Default LAN Settings to Perform Setup Again

Action
Follow the procedure below to restore LAN settings of the machine to the default state.
1
Use the Menu button to select Device settings.
2
Use the [ or ] button to select LAN settings, then
press the OK button.
3
Select Reset LAN settings, then press the OK button.
4
Select Yes, then press the OK button.
5
Make sure that the screen shown to the right appears.
•
After a while, the Device settings screen returns. Press the
COPY button.
The LAN setting of the machine is now restored to the default state.
•
Perform setup by following the procedures in "10 Set Up a Wireless Connection" on page 26 and
onward in the printed manual: Getting Started.
<Default State>
Wireless LAN
Inactive
SSID
BJNPSETUP
Data encryption
Inactive
TCP/IP setting
Obtain an IP address automatically