Canon PIXMA MX700 Series 서비스 매뉴얼 - 페이지 16
{카테고리_이름} Canon PIXMA MX700 Series에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon PIXMA MX700 Series 44 페이지. Office all-in-one printer
Canon PIXMA MX700 Series에 대해서도 마찬가지입니다: 청소 매뉴얼 (7 페이지), 네트워크 설정 매뉴얼 (32 페이지), 보충 설명서 (6 페이지), 설정 지침 (2 페이지), 브로셔 및 사양 (2 페이지), 기술 정보 (2 페이지)
페이지 인쇄
Faulty scanning
*1: Replace the print head only after the print head deep cleaning is performed 2 times, and when the problem persists.
<2. LIST OF ERROR DISPLAY / INDICATION / TROUBLESHOOTING>
No scanning.
Streaks or smears on the scanned
image.
No paper feeding from the ADF (no
operation of the ADF motor).
Document slipping over the roller
(copied image enlarged), or document
not separated.
- Clean grease or oil off the timing slit disk film.
- Replace the
- timing slit disk film,
- timing sensor unit,
- LF roller, or
- logic board.
- Confirm the connection between the scanning unit and
the logic board.
- Replace the
- scanning unit, or
- logic board.
- Clean the platen glass.
- Confirm the connection between the scanning unit and
the logic board.
- Replace the
- scanning unit,
- logic board, or
- document pressure sheet.
- Confirm the connection
- between the ADF motor and the ADF PWB, and
- between the ADF PWB and the logic board.
- Replace the
- document feed unit, or
- logic board.
- Clean the friction tab, document feed roller, and
separation roller. - Replace the document feed unit.
14 / 41