Canon PIXMA MX700 Series 서비스 매뉴얼 - 페이지 31
{카테고리_이름} Canon PIXMA MX700 Series에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon PIXMA MX700 Series 44 페이지. Office all-in-one printer
Canon PIXMA MX700 Series에 대해서도 마찬가지입니다: 청소 매뉴얼 (7 페이지), 네트워크 설정 매뉴얼 (32 페이지), 보충 설명서 (6 페이지), 설정 지침 (2 페이지), 브로셔 및 사양 (2 페이지), 기술 정보 (2 페이지)
페이지 인쇄
MX700
(7) Ink absorber replacement
1) At the time of an error indicating that the ink absorber is full, replace either the main or the borderless-print ink absorber according
to the error message.
- When the main ink absorber is full:
Replace the absorber indicated by the blue frame in the photo below (component of QY5-0192).
- When the borderless-print ink absorber is full:
Replace 2 absorbers in the red circle in the photo below and the platen ink absorber (components of QY5-0192).
The main ink absorber and the borderless-print ink absorber have separate counters respectively. After ink absorber replacement,
reset the applicable ink absorber counter according to the replaced ink absorber. For details, see
2) Partial replacement of the main ink absorber
For the main ink absorber, the following replacement methods are available:
Replacement method
Partial replacement
Whole replacement
After ink absorber replacement, set the ink absorber counter value according to the replacement method.
See
(8) Ink absorber counter
<How to perform the partial replacement>
Remove the rear cover (No. 1 in the photo) and the ink absorber cover (No. 2 in the photo) from the rear side of the machine, and
replace the portion of the main ink absorber (approx. 40%, No. 3 in the photo).
(Time required: Approx. 4 min. including the operation check after replacement)
Difficulties
Ink absorber volume to be replaced
Low
Approx. 40% of the entire main ink absorber
High
The entire main ink absorber
setting, for details.
29 / 41
TABLE OF CONTENTS
(8) Ink absorber counter
Print yield after replacement
Approx. 8,000 pages
Approx. 20,000 pages
setting.