Canon PIXMA MX700 Series 서비스 매뉴얼 - 페이지 43

{카테고리_이름} Canon PIXMA MX700 Series에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon PIXMA MX700 Series 44 페이지. Office all-in-one printer
Canon PIXMA MX700 Series에 대해서도 마찬가지입니다: 청소 매뉴얼 (7 페이지), 네트워크 설정 매뉴얼 (32 페이지), 보충 설명서 (6 페이지), 설정 지침 (2 페이지), 브로셔 및 사양 (2 페이지), 기술 정보 (2 페이지)

페이지 인쇄

MX700

4. MACHINE TRANSPORTATION

This section describes the procedures for transporting the machine for returning after repair, etc.

1) Be sure to transport the machine after moving the CIS unit (Scanner Carriage Unit) to the appropriate position. If the

machine whose CIS unit is in the home position (inappropriate position) is vibrated or dropped when it is transported, the

scanner flat cable may be jammed/damaged and the scanner may become out of work.

After finishing the service mode correctly, the CIS unit automatically moves to the appropriate position.

Appropriate CIS unit position at transportation

2) Keep the print head and ink tanks installed in the carriage.

If the print head is removed from the machine and left alone by itself, ink (the pigment-based black ink in particular) is likely to

dry. For this reason, keep the print head installed in the machine even during transportation.

3) Turn off the machine to securely lock the carriage in the home position. (When the machine is turned off, the carriage is

automatically locked in place.)

This is to prevent the carriage from moving and applying stress to the carriage flexible cable, or causing ink leakage, during

transportation.

If the print head must be removed from the machine and transported alone, attach the protective cap (used when the packing was

opened) to the print head (to protect the print head face from damage due to shocks).

<4. MACHINE TRANSPORTATION>

41 / 41

TABLE OF CONTENTS