Canon PIXMA MX850 네트워크 설정 매뉴얼 - 페이지 29

{카테고리_이름} Canon PIXMA MX850에 대한 네트워크 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon PIXMA MX850 43 페이지. Multifunction brochure
Canon PIXMA MX850에 대해서도 마찬가지입니다: 보충 설명서 (6 페이지), 설정 지침 (2 페이지), 브로셔 (2 페이지)

페이지 인쇄

2-2 Setting Up an Additional LAN-connected

Computer

Important

To set up an additional LAN-connected computer, the necessary software must be installed on the

additional computer. See "1 Preparing for Setup" on page 17 and "2 Installing the Software" on page 18 to

confirm that the software installation is complete, then proceed with the procedure below.

Make sure that the machine is connected to

the network device with a LAN cable.

Note

If MAC address filtering is configured to restrict

access to the machine, make sure beforehand to

up. To register the address, use the Canon IJ

Network Tool on the computer that has already been

set up.

Make sure that the computer you are setting up is

not connected to the machine with a USB cable.

This setup procedure does not involve connecting

the USB cable.

On the Canon IJ Network Tool screen,

select LAN connection, then click OK.

If the Canon IJ Network Tool does not start up

automatically, select Library > Printers > Canon >

BJPrinter > Utilities > Canon IJ Network Tool.

Note

If you select USB connection, the Canon IJ Network

Tool will exit without setting up the machine to be used

over wired LAN.

When the screen shown on the right appears,

click OK.

Select Setup in the pop-up menu, then click

Setting Up the Machine and the Computer (Macintosh)

(continued from step 12 on page 22)