Canon PIXMA MX850 네트워크 설정 매뉴얼 - 페이지 35
{카테고리_이름} Canon PIXMA MX850에 대한 네트워크 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon PIXMA MX850 43 페이지. Multifunction brochure
Canon PIXMA MX850에 대해서도 마찬가지입니다: 보충 설명서 (6 페이지), 설정 지침 (2 페이지), 브로셔 (2 페이지)
페이지 인쇄
- 1. Setup Outline
- 2. Setting up the Machine and the Computer (Windows)
- 3. Preparing for Setup
- 4. Installing the Software
- 5. Setting up for Use over Wired Lan
- 6. Setting up the Machine and the Computer (Macintosh)
- 7. Cannot Connect to the Machine (the Machine Is Not Detected)
- 8. Setting up the Machine Again for Use over Network
The Following Screen Is Displayed during Setup
The Set Printer IP Address dialog box is displayed
Cause
The machine in the network was not
detected.
Specify the IP address of the machine and click Connect to retry the detection
of the machine.
The IP address currently set for the machine is displayed on the dialog box.
(1)Get IP address automatically
Select to use an IP address provided by a DHCP server. This requires that
the DHCP function is enabled on the router.
(2)Use next IP address
Select to manually specify an IP address, for example if there is no DHCP
server functionality in the network environment in which you are using the
machine.
IP Address/Subnet Mask/Default Gateway
Enter each value to specify a fixed IP address when Use next IP Address is
selected.
(3)Network Information
Click to display the Network Information dialog box, and confirm network
settings when your machine cannot be detected automatically during setup
for use over the network.
(4)Connect
Click to search for the machine with the specified settings. If the machine is
still not detected with a specified IP address, see "Cannot Connect to the
Machine (the machine is not detected)" on page 32.
Action
(1)
(2)
(3)
(4)
Troubleshooting
33