Canon PIXMA MX850 네트워크 설정 매뉴얼 - 페이지 40
{카테고리_이름} Canon PIXMA MX850에 대한 네트워크 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon PIXMA MX850 43 페이지. Multifunction brochure
Canon PIXMA MX850에 대해서도 마찬가지입니다: 보충 설명서 (6 페이지), 설정 지침 (2 페이지), 브로셔 (2 페이지)
페이지 인쇄
- 1. Setup Outline
- 2. Setting up the Machine and the Computer (Windows)
- 3. Preparing for Setup
- 4. Installing the Software
- 5. Setting up for Use over Wired Lan
- 6. Setting up the Machine and the Computer (Macintosh)
- 7. Cannot Connect to the Machine (the Machine Is Not Detected)
- 8. Setting up the Machine Again for Use over Network
Checking Information about the Network
Checking the IP address or the MAC address of the machine
To check the IP address or the MAC address of the machine, display the network setting
information using the Operation Panel of the machine or the Canon IJ Network Tool.
To display the network setting information using the Operation Panel, refer to "Displaying
Network Setting Information" in "Displaying and Initializing Network Settings" of the User's Guide
on-screen manual.
To display the network setting information using the Canon IJ Network Tool, select Network
Information on the View menu.
Checking the IP address or the MAC address of the computer
To check the IP address or MAC address assigned to the computer, follow the procedure below.
(1) Click Start > All Programs (or Programs) > Accessories > Command Prompt.
(2) Enter "ipconfig /all" and press the Enter key.
The IP addresses and the MAC addresses of the network devices installed on your
computer are displayed. When the network device is not connected to the network, the IP
address is not displayed.
(1) Click System Preferences in the Dock, then click Network.
(2) In the Show pop-up menu, select Built-in Ethernet.
Selecting TCP/IP displays the IP address. Selecting Ethernet displays the MAC address.
Checking the network setting information
For details on displaying the network setting information, refer to "Displaying Network Setting
Information" in "Displaying and Initializing Network Settings" of the User's Guide on-screen
manual.
Confirming the version of Windows XP
If you are using Windows XP, you may need to confirm your system version to configure the
network setting of your computer.
To check the version of your Windows XP, follow the procedure below.
(1) Right-click My Computer on the Start menu and select Properties.
The System Properties dialog box will be displayed.
(2) Select the General tab.
(3) Confirm the version of your Windows XP under System.
38
Troubleshooting