Akw M17 DigiPump 설치 및 사용자 관리 지침 - 페이지 5
{카테고리_이름} Akw M17 DigiPump에 대한 설치 및 사용자 관리 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Akw M17 DigiPump 20 페이지. Digipump
페이지 인쇄Fixing pump to surface
Fixing pump to surface
Important: For service & maintenance
purposes this product should be installed
in an accessible location.
The pump unit must be located on a
vertical surface with the inlet/outlet
connections at the bottom of the unit
in horizontal alignment, with the AKW
case logo at the top.
Pipe connections must be easily
accessible and a clearance of 100mm
around the base and sides is
recommended.
Fitting Pump Spacers
Fitting Pump Spacers
Use the Pump Spacers to prevent the cables being trapped.
Separate the spacers, remove the adhesive backing and snap lock into position
Pump Spacers
Power cable
Flow sensor
cables
5
100mm (4in)
minimum clearance all round
Remove the adhesive tab at
this hole only.