Doran 4300 운영자 매뉴얼 - 페이지 3

{카테고리_이름} Doran 4300에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Doran 4300 12 페이지.

Before unpacking your Doran scale, please read the instructions in this section.

Your new scale is a durable industrial product, but it is also a sensitive weighing

instrument. Normal care should be taken when handling and using this product.

Improper handling or abuse can damage the scale and result in costly repairs

that may not be covered by the warranty. If you notice any shipping damage,

notify the shipper immediately. Please observe the following precautions to

insure years of trouble free service from your new scale.

Carefully remove the scale from the shipping carton.

shipping materials in case the scale must be shipped elsewhere.

INSTALLATION:

Locate the desired position for the scale platform and indicator. The platform

location should be flat, level and free of any obstructions which might interfere

with the operation of the scale platform.

When installing your scale, make sure that an AC power outlet is close to the

scale and easily accessible.

Place the scale on a flat level surface free from any obstructions which might

interfere with the operation of the scale platform.

Prior to connecting your scale to power, check the serial number tag on the

indicator for the correct operating voltage. Verify that the power you connect the

scale to matches the rated voltage.

Be sure the AC power is not excessively noisy - this can occur if large inductive

loads, such as solenoids or motors, are on the same power line. The Model

4300 has a filtered power supply to reduce the effects of normal line noise, but

severe fluctuations may cause operation problems. If problems occur, noise

producing devices may have to be suppressed to minimize their effect.

Unpacking Your Scale

DO NOT drop the scale indicator or scale platform.

DO NOT immerse the scale indicator or platform.

DO NOT drop objects on the platform.

DO NOT pick up the scale platform by the "spider."

Be sure to retain all