Doran 4300 운영자 매뉴얼 - 페이지 6

{카테고리_이름} Doran 4300에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Doran 4300 12 페이지.

OVER / UNDER:

The OVER and UNDER pushbuttons are used to enter the weight values needed

for checkweighing applications. In their simplest configuration, these buttons will

enter the check weight by pressing either the OVER or UNDER button. When in

this mode, the current weight is entered as the checkweighing limit.

The default entry mode uses the OVER and UNDER buttons to take the current

weight and scroll it up or down (arrows on the button indicate the scroll direction)

until the desired check weight is reached. Once the desired value is reached,

pressing ZERO (ENTER) will enter the desired value in the scale. The 4300 also

offers five band check weighing feature. Refer to your dealer or Instruction

manual for details.

Accumulator and Counter (Hidden pushbutton):

Press the Capacity Label / Hidden pushbutton to enter the accumulator / count

recall mode. The display will show "Accunn" followed by the accumulated weight,

then "Countr" follow by the counter value. The display will continue to repeat this

message until a key is pressed. The accumulator / counter recall mode will

display the accumulator value in the units currently selected in the weigh mode.

The accumulator and counter is incremented once every time a manual or

automatic accumulation occurs. When the weight has been added to the

accumulator and the counter has been incremented, the left most display digit

will momentarily display a "o" to confirm operation. The maximum value that can

be shown for the accumulator and counter is 6 digits or 999999. When the

maximum value is reached, the accumulator or counter will rollover starting at a

zero value.

Press the UNITS pushbutton to exit the accumulator / counter recall mode

without changing their values.

Press the ZERO pushbutton, while in the accumulator / counter recall mode to

clear the accumulator and counter values. The display will show "Clr Ac" and

exit from the recall mode.

Press the PRINT pushbutton, while in accumulator recall mode, to transmit the

accumulator and counter values through the RS232 port or optional

communication port. Label buffer 4 contains the print string formatting for the

accumulated weight and counter value. Refer to your dealer or Instruction

manual for details.

Note: Changing the current display units will clear both the accumulator and

counter values while in the weigh mode. Only Available in non Legal for Trade

applications.