Doran 4300 운영자 매뉴얼 - 페이지 5

{카테고리_이름} Doran 4300에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Doran 4300 12 페이지.

Indicators:

The Doran 4300 has a main display and eleven indicator lights. These indicators

provide the operator with information about the scale and the current weighing

operation. The main display is used to provide the operator with the current

weight. The units indicators, located on the right of the main display, show the

current measurement units.

? The Motion (MOT) located on the left side of the display, informs the operator

when the scale is in Motion.

? The Center of Zero (ZERO) indicators, located on the left side of the display,

informs the operator when the scale is at Zero.

? The negative (NEG) indicator informs the operator whether the weight display

is showing a negative weight.

? The low battery (BATT) indicator is avaliable when battery option is installed.

The BATT indicator informs the operator that a battery charge is required.

? Checkweigh information is provided by the OVER, ACCEPT and OVER lights.

ZERO:

The ZERO push button is used to zero the scale prior to making a reading. The

zero button can function over the full range of the scale. To zero the scale, wait

until the scale is stable and press the ZERO button. The scale will zero

immediately. The 4300 will not zero if the scale is in motion. The 4300 is

equipped with an optional Zero on Demand feature which holds zero requests

until motion stops. This option may be activated during the scale setup

procedure. Refer to your dealer or Instruction manual for details.

UNITS :

The UNITS button permits the operator to change the scale units by pressing a

button. After pressing UNITS, the units indicator will immediately display the

current weighing unit. The UNITS button has several configuration parameters

which can disable the UNITS button or limit the display units available. Refer to

your dealer or Instruction manual for details.

PRINT:

The PRINT button permits the operator to print the current weight by pressing a

button. Like the ZERO button, the user must wait for motion to stop before

pressing the PRINT button. The current weight will then be transmitted to the

printer. When the data is transmitted, the left most display digit will momentarily

display a "r" to confirm data transmission. The 4300 has a "Print on Demand"

feature which stores a PRINT request until the scale is stable. Once stable, the

scale transmits the current weight to the printer. The 4300 also has several

automatic print options which may be used to simplify printer operation. Refer to

your dealer or Instruction manual for details.