Astro Machine AstroJet M1C 빠른 시작 매뉴얼

{카테고리_이름} Astro Machine AstroJet M1C에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Astro Machine AstroJet M1C 6 페이지.
Astro Machine AstroJet M1C에 대해서도 마찬가지입니다: 빠른 참조 (2 페이지)

페이지 인쇄

AstroJet

Quick Start Guide

Step 1

Remove Printer and

Accessories from packaging

Place Printer on a stable surface. Use

the Bubble Gauge mounted on the Print

Engine (or a small level) to make sure

the Printer is level.

Step 2

Remove Service Station Transport Tab and

Shipping Tape

1. Open Top Cover.

2. Open Print Engine Clamshell (2 latches).

CAUTION

HOLD ONTO BOTH LATCHES WHEN OPENING AND

CLOSING CLAMSHELL TO PREVENT DAMAGE.

DO NOT ALLOW CLAMSHELL TO DROP OR SLAM

CLOSED. A STOP LIMITS RAISING CLAMSHELL MORE

THAN 60°.

3. Remove

Transport Tab

Insert [A].

M1C

Page 1

Step 3

Connect Power to Printer

1. Main Power Switch should be

turned OFF.

2. Power cord plugs into receptacle

[1]. (Located just below the power

switch.)

Connect Printer to Computer

USB cable from computer plugs into

the Printer's USB port [3].

Network port [2].

Unwinder Interconnect port [4].

(Located just below the USB port.)

DO NOT CONNECT USB CABLE OR

NETWORK CABLE YET.

DO NOT TURN PRINTER POWER

SWITCH YET.