Astro Machine AstroJet M1C 빠른 시작 매뉴얼 - 페이지 5

{카테고리_이름} Astro Machine AstroJet M1C에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Astro Machine AstroJet M1C 6 페이지.
Astro Machine AstroJet M1C에 대해서도 마찬가지입니다: 빠른 참조 (2 페이지)

페이지 인쇄

2. Carefully remove Printhead Cartridge from

foil packaging.

3. Carefully insert Cartridge into compartment at an

angle (as shown) [1], Once seated, gently tilt

Cartridge back until it snaps into position [2].

DO NOT FORCE Cartridge into position.

WARNING!

TO AVOID ELECTRICAL SHOCK OR SHORTING:

Before installing the Printhead, make sure

nozzles are hydrated and contacts are DRY!

4. Carefully insert Cartridge into compartment at an

angle (as shown) [1], Once seated, gently tilt

Cartridge back until it snaps into position [2].

DO NOT FORCE Cartridge into position.

TO AVOID ELECTRICAL SHOCK OR SHORTING:

Before installing the Printhead, make sure

nozzles are hydrated and contacts are DRY!

5. Open Print Engine Clamshell. Moisten

Printhead nozzles using distilled water and a

wet, lint-free cloth. Wipe end to end. (Gray strip

located below orange strip.) Close and latch

Print Engine Clamshell.

HOLD ONTO BOTH LATCHES WHEN OPENING

AND CLOSING PRINTHEAD CLAMSHELL TO

PREVENT DAMAGE.

DO NOT ALLOW CLAMSHELL TO DROP OR SLAM

CLOSED.

TO PREVENT DAMAGE TO INK LINES, A STOP

LIMITS RAISING CLAMSHELL MORE THAN 60°.

Page 5

WARNING!

CAUTION