Astro Machine AstroJet M1C Manual de início rápido - Página 5
Procurar online ou descarregar pdf Manual de início rápido para Fabricante de etiquetas Astro Machine AstroJet M1C. Astro Machine AstroJet M1C 6 páginas.
Também para Astro Machine AstroJet M1C: Referência rápida (2 páginas)
Imprimir página2. Carefully remove Printhead Cartridge from
foil packaging.
3. Carefully insert Cartridge into compartment at an
angle (as shown) [1], Once seated, gently tilt
Cartridge back until it snaps into position [2].
DO NOT FORCE Cartridge into position.
WARNING!
TO AVOID ELECTRICAL SHOCK OR SHORTING:
Before installing the Printhead, make sure
nozzles are hydrated and contacts are DRY!
4. Carefully insert Cartridge into compartment at an
angle (as shown) [1], Once seated, gently tilt
Cartridge back until it snaps into position [2].
DO NOT FORCE Cartridge into position.
TO AVOID ELECTRICAL SHOCK OR SHORTING:
Before installing the Printhead, make sure
nozzles are hydrated and contacts are DRY!
5. Open Print Engine Clamshell. Moisten
Printhead nozzles using distilled water and a
wet, lint-free cloth. Wipe end to end. (Gray strip
located below orange strip.) Close and latch
Print Engine Clamshell.
HOLD ONTO BOTH LATCHES WHEN OPENING
AND CLOSING PRINTHEAD CLAMSHELL TO
PREVENT DAMAGE.
DO NOT ALLOW CLAMSHELL TO DROP OR SLAM
CLOSED.
TO PREVENT DAMAGE TO INK LINES, A STOP
LIMITS RAISING CLAMSHELL MORE THAN 60°.
Page 5
WARNING!
CAUTION