Canon CN10x25 IAS S/E1 운영 매뉴얼 - 페이지 18
{카테고리_이름} Canon CN10x25 IAS S/E1에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon CN10x25 IAS S/E1 34 페이지. Zoom lens
페이지 인쇄
- 1. Fcc Regulations
- 2. General Safety Information
- 3. Handling the Product
- 4. Maintenance and Inspection
- 5. How to Mount
- 6. Available Accessories
- 7. Dimensions of Parts
- 8. Iris Gain Adjustment
- 9. Mode Setting
- 10. Zoom Operation
- 11. Focus Operation
- 12. Iris Operation
- 13. Extender Operation
- 14. Macro Operation
- 15. Switch Operations
- 16. Product Specifications
5 OPERATION
5 OPERATION
5-1. ZOOM OPERATION
5-1-1. Manual Zoom Operation
FOCUS
MANU. SERVO
REMOTE1
REMOTE2/
REMOTE3
VIRTUAL
Zoom Operation Change-over Knob
Toward Telephoto end
Zoom Ring
Zoom Lever
5-1-2. Servo Zoom Operation
Zoom operation can be performed by driving the built-in motor in the lens.
Zoom Rocker Seesaw
5-1-3. Maximum Zoom Speed Adjustment
The maximum speed of zoom when the zoom rocker seesaw is pressed can be adjusted with the max.
zoom speed adjusting volume.
Max. Zoom Speed
Adjusting Volume
The adjustment and the setting can also be made on the information display. Refer to "Information
Display Manual" in the supplied CD-ROM.
ZOOM
MANU.
SERVO
Toward Widest end
1
Set the zoom operation change-over knob at the bottom of
the lens drive unit to MANU. position.
2
Turn the zoom ring (or zoom lever) to perform zoom operation.
NOTE
The zoom operation change-over knob must be set to the MANU.
position before performing manual zoom operations.
The lens may be damaged if manual zoom operations are forcibly
performed with the knob at the SERVO position.
1
Set the zoom operation change-over knob to SERVO position.
2
Pressed the zoom rocker seesaw to perform zoom operation.
Zoom speed changes by the depth of the switch being pressed.
The deeper the switch is pressed the faster the zoom speed be-
comes.
E12